Steering column switch module (SCSM) - component overview

1 - Return spring with slip ring

• Removing and installing → Return spring with slip ring, removing and installing 

2 - Steering Angle Sensor G85

• Removing and installing → Steering Angle Sensor G85, removing and installing 

3 - Cylinder bolt (0.65 Nm)

4 - Cruise Control Switch E45

• Removing and installing → Cruise Control Switch E45, removing and installing 

5 - Cylinder bolt (0.65 Nm)

6 - Turn Signal Switch E2

• Removing and installing → Turn Signal Switch E2, removing and installing 

7 - Retaining bracket

8 - Steering Column Electronic Systems Control Module J527

• Removing and installing → Steering Column Electronic Systems Control Module J527, removing and installing 
• Connector assignment of Steering Column Electronic Systems Control Module J527 → Connector assignment on Steering Column Electronic Systems Control Module J527 - front side 

9 - Clamping screw (3 Nm)

10 - Windshield Wiper/Washer Switch E22

• Removing and installing → Windshield Wiper/Washer Switch E22, removing and installing 

11 - Cylinder bolt (0.65 Nm)