4-way lumbar support, assembly overview

Fig 1: 4-Way Lumbar Support, Assembly Overview

Courtesy of VOLKSWAGEN UNITED STATES, INC.

1 - Bowden cable for lumbar support height adjustment

2 - Bowden cable for lumbar support adjustment

3 - 4-way lumbar support

• Removing 

• Remove seat → Seat, assembly overview .
• Attach fixture for seat repair VAS 6136 to engine and transmission holder VAS 6095.
• Attach front seat to fixture for seat repair VAS 6136.
• Remove side trim, outboard side → Side trim on sill panel side, removing and installing .

• Remove side trim, inboard side → Side trim, inboard side, assembly overview .
• Remove backrest → Front seat backrest, assembly overview .
• Remove backrest cover panel → Backrest cover panel, removing and installing .
• Remove backrest frame → Backrest frame, assembly overview .

• Disengage Bowden cable for lumbar support adjustment - 2  - from hook - 4  -.
• Disengage Bowden cable for lumbar support height adjustment - 1  - at retainer pin - 5  - and at idler wheel - 6  -.
• Disengage lower 4-way lumbar support - 3  - at positions - B  - (2x).
• Disengage upper 4-way lumbar support - 3  - at positions - A  - (2x).

• Installing 

• Installation is in reverse order of removal.

4 - Hook

5 - Retaining tabs

6 - Idler roller