Turbocharger Vacuum Diaphragm

Removing 

-- Remove the turbocharger. Refer to TURBOCHARGER .

-- Remove securing plate -1- over linkage on turbocharger.

Fig 1: Removing Securing Plate Over Linkage On Turbocharger

Courtesy of AUDI OF AMERICA, LLC

-- Loosen lock nut -2-.

Fig 2: Identifying Lock Nut, Linkage From Turbocharger, Vacuum Diaphragm & Turbocharger

Courtesy of AUDI OF AMERICA, LLC

-- Disconnect linkage from turbocharger -3-.

-- Disconnect vacuum diaphragm -1- and remove nuts -4-.

Installing 

Install in reverse order of removal. Note the following:

• For the correct tightening specifications, refer to PART IV 

-- Adjust the turbocharger vacuum diaphragm. Refer to TURBOCHARGER VACUUM DIAPHRAGM, ADJUSTING .

-- Install the turbocharger. Refer to TURBOCHARGER .