Part III

Part I, refer to PART I 

Part II, refer to PART II 

Part IV, refer to PART IV 

Fig 1: Turbocharger (Engine Code BHZ) Assembly Overview -- Part III

Courtesy of AUDI OF AMERICA, LLC

1. Gasket
   • Replace
2. Nut
   • Replace
   • 21 Nm
   • Coat stud bolts on exhaust manifold with hot bolt paste.
   • Hot bolt paste.
3. Bolt
   • 35 Nm
4. Seal
   • Replace
5. Bolt
   • 9 Nm
6. Coolant Return Line
7. Turbocharger
   • Can only be replaced with exhaust manifold and pressure unit.
   • Removing and installing, refer to TURBOCHARGER 
8. Bracket
9. Bolt
   • 30 Nm
   • Coat bolt with hot bolt paste
   • Hot bolt paste.
10. Bolt
    • 30 Nm
    • Coat bolt with hot bolt paste
    • Hot bolt paste.
11. Bracket
12. Bolt
    • 23 Nm
13. Nut
    • Replace
    • 30 Nm
    • Do not open when removing turbocharger
    • Coat stud bolts on exhaust manifold with hot bolt paste.
    • Hot bolt paste.
14. Fastening Strip