Windshield Washer Fluid Reservoir, Removing And Installing: Installation

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2015 Audi Q7, 2014 Audi Q7, 2013 Audi Q7, 2012 Audi Q7, and 2011 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.

Tightening specifications, refer to WINDSHIELD WASHER SYSTEM OVERVIEW .

Install in reverse order of removal. Note the following:

-- When attaching water hose, make sure it engages audibly in connection of washer fluid pump.

-- Slide filler tube filler hose into washer fluid reservoir.

NOTE:

Be careful not to crimp the O-ring when Installation it.

-- Install the right front wheel housing liner, refer to Wheel Housing Liners .