Washer Fluid Reservoir Filler Neck, Removing And Installing: Installation

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2015 Audi Q7, 2014 Audi Q7, 2013 Audi Q7, 2012 Audi Q7, and 2011 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.

Tightening specifications, refer to WINDSHIELD WASHER SYSTEM OVERVIEW .

Install in reverse order of removal. Note the following:

-- Slide filler tube filler hose into washer fluid reservoir.

NOTE:

Make sure O-ring -3- is not crimped when inserted.

-- Install the right front wheel housing liner, refer to Wheel Housing Liners .