Sill Panel Strip, Removing And Installing: Installing
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2015 Audi Q7, 2014 Audi Q7, 2013 Audi Q7, 2012 Audi Q7, and 2011 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
Install in reverse order of removal. Observe the following when doing so:
-- Before installing the sill panel, check the securing clips for damage, replace if necessary.
-- Before clipping in wheel housing liner -1-, support piece -3- must be in the installation location on the C-pillar.
-- Install the B-pillar trim. Refer to B-PILLAR TRIM OVERVIEW .
-- Draw door seal lip over sill panel strip and over wheel housing liner.