LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2008 >> Q7 4.2 >> Repair and Diagnosis >> External Pages >> Different car >> Section 29 (Interior Trim) >> 70 Interior Trim >> Trim >> Rear Cross Panel Trim, Removing And Installing >> Removing

Rear Cross Panel Trim, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2015 Audi Q7, 2014 Audi Q7, 2013 Audi Q7, 2012 Audi Q7, and 2011 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the luggage compartment floor and the cargo tray.

-- Remove the rear cross panel trim securing screws. Refer to -Item 4-  REAR CROSS PANEL TRIM OVERVIEW.

-- If present, disconnect the harness connector. Refer to Installing  and remove the rear cross panel trim upward.