Fog Lamp Bulb, Removing And Installing
Removal
-- Remove fog lamp, refer to FOG LAMP, REMOVING AND INSTALLING .
-- Rotate the bulb -1- counterclockwise in direction of -arrow- and remove it from the fog lamp housing -2-.
Installation
Install in reverse order of removal. Note the following:
-- Insert new bulb (H11 - 12V, 55 W) in housing without touching glass bulb with bare hand.
-- Rotate the bulb clockwise to secure.
-- Adjusting fog lamps, refer to FOG LAMP, ADJUSTING .
Tightening Specifications
| Component | Nm |
|---|---|
| Fog lamp housing to bumper cover | 2 |