Seat cover and padding for rear seat bench, assembly overview

Fig 1: Seat Cover And Padding For Rear Seat Bench, Assembly Overview

Courtesy of VOLKSWAGEN UNITED STATES, INC.

1 - Padding

2 - Securing strips (2x)

3 - Securing strips (4x)

4 - Seat cover

• Removing 

• Remove rear bench seat → Rear seat bench, assembly overview .
• Push securing strips - 2  - (2x) apart in opposite directions.
• Pry out securing strips - 3  - (4x).
• Cut through staples - 5  -.

• Fold cover - 4  - up.
• Remove cover -4- upward and cut through staples - 5  -.
• Remove padding - 1  -.

• Installing 

• Replace staples - 5  -.
• Install cover and padding in reverse order to removal.

5 - Staples