Rear seat backrest, assembly overview: Notes
1 - Rear seat backrest
- Removing
- Remove rear bench seat → Rear seat bench, assembly overview .
- Remove head restraints → Head restraints, removing and installing .
- Remove head restraint guides → Head restraint guides, removing and installing .
- Open convertible top compartment to gain access to belt guides of rear seat belts.
- Disengage seatbelt guides (2x) at left and right → Rear 3-point seat belt with belt tensioner, assembly overview , Item - 2 -.
- Remove center armrest.
- Remove cord at fabric cover of belt buckles Cord at fabric cover of belt buckles, removing and installing
- Remove bolts - 2 - (2x).
- Remove rear seat backrest - 1 -.
- With seat heating: Disconnect connector for seat heating.
- Installing
- With seat heating: Connect connector for seat heating.
- Guide rear seat backrest - 1 - in at bottom.
- Push rear seat backrest - 1 - upward and engage rear seat backrest - 1 - at top (3x).
- Press rear seat backrest - 1 - fully down.
- Install bolts - 2 - (2x).
- Install head restraint guides → Head restraint guides, removing and installing .
- Install head restraints → Head restraints, removing and installing .
2 - Bolts (2x)
- Tightening torque 8 Nm