High Performance HALDEX Clutch Oil, Changing

Special tools and workshop equipment required 

• Torque Wrench 5-50 Nm V.A.G 1331
• Drip Tray for VAS 6100 VAS 6208
• High performance oil for Haldex clutch.

NOTE:

You must lay a cloth on the crossmember -arrows-.

Fig 1: Identifying Crossmember

Courtesy of AUDI OF AMERICA, LLC

If oil gets on the crossmember or enters the perforations in the crossmember, it must be carefully removed.

-- Place a drip tray underneath.

-- Remove the drain plug -A- and completely drain the high performance Haldex clutch oil.

Fig 2: Identifying Oil Drain Plug

Courtesy of AUDI OF AMERICA, LLC

-- Install the drain plug -A- with a new sealing ring and tighten to 30 Nm.

-- Remove plug -B- and fill high performance Haldex clutch oil. Refer to HALDEX CLUTCH OIL, FILLING .

-- Finally, check oil level in Haldex clutch. Refer to OIL LEVEL IN THE HALDEX CLUTCH, CHECKING .

Tightening Specifications