End pipe, replacing

WARNING: This page is about a different car, the 2010 Audi A8, 2009 Audi A8, 2008 Audi A8, and 2007 Audi A8. However, it is still accessible from the selected car via links, so may be relevant.

Special tools, testers and auxiliary items required

GW00015704

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Chain pipe cutter VAS 6254

Work procedure

Tightening torque → Muffler, assembly overview .

GW00017412

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Separate end pipe - 1 - at separating point - C - using Chain Pipe Cutter VAS 6254.
Connect end pipe - 3 - up to marking - A - so that slot on end pipe lines up with marking - B -.
Tighten clamping sleeve nut - 2 -.