Sealant applied on cylinder block (for guide frame)
WARNING: This page is about a different car, the 2010 Audi A8, 2009 Audi A8, 2008 Audi A8, and 2007 Audi A8. However, it is still accessible from the selected car via links, so may be relevant.
- Clean sealing surfaces so they are completely free of any oil or grease.
- Apply sealant beads - arrows - to clean sealing surfaces as shown in illustration.
- Thickness of sealant beads: 2.0 mm.
- Install seals - 1 to 4 -.
Installation position of alignment bushings
- Check whether alignment bushings - arrows - are inserted at locations in guide frame as shown in the illustration.