Wheelhousing trim, removing and installing

Fig 1: Wheelhousing Trim Remove/Install Components

Courtesy of VOLKSWAGEN UNITED STATES, INC.

1 - Wheel housing trim

• Removal:

• Remove lower B-pillar trim → Lower B-pillar trim, removing and installing .
• Remove C-pillar trim → C-pillar trim, removing and installing .
• Remove side upholstery → Rear seat side padding, removing and installing .
• Unclip three clips - 2  - from their mounts - 3  - and remove wheelhousing trim - 1  -.

• Installing: 
• After assembling trim, make sure seal is properly fitted.

2 - Clamps (Qty. 3)

3 - Mounts (Qty. 3)