General overview
NOTE:
Headlights must be readjusted after performing measures which could affect their setting.
1 - Headlight housing
2 - Impact screw
- For adjusting headlight housing to body contour
- Must make contact at lock carrier
3 - Light bulb for turn signal/parking light
- 12 V, 27/7 W
- Orange
- Replacing bulb. Refer to Light bulb for turn signal/parking light, replacing
4 - Light bulb socket
5 - Housing cover
6 - Bulb for low beam
- H1 - 12 V, 55 W
- Replacing. Refer to Light bulb for low beam, replacing
7 - Bulb for high beam
- H9 - 12 V, 65 W
- Replacing. Refer to Light bulb for high beam, replacing
8 - 6 Nm
9 - Gap cover