Light bulb for high beam, replacing

Removing 

• Remove headlight. Refer to Headlights, removing and installing: .
• Remove housing cover from headlight housing.

Fig 1: Rotating Light Bulb Counter Clockwise And Disconnecting Electrical Harness Connector

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• Rotate light bulb counter clockwise -arrow- and remove it from headlight housing.
• Disconnect electrical harness connector -1- at bulb.

Installing 

Installation is reverse of removal, paying attention to the following:

• Do not touch glass portion with bare hands.
• Secure light bulb by turning clockwise.
• Secure housing cover using wire clamp.
• Install headlight. Refer to Installing .