Lower section of oil pan, removing and installing: Installing

Install in the opposite order to removing. When installing, note the following points:

• Clean sealing surfaces; make sure that they are free of oil and grease.
• Install new gasket on lower section of oil pan and install on upper section of oil pan with two diagonally opposite bolts.
• Tighten all securing bolts hand-tight.
• Tighten bolts to 10 Nm with torque wrench, working from center outward.
• Install new seal on oil drain plug and tighten to 30 Nm.
• Fill engine with oil.

  Oil capacities, ENGINE OIL, FILLING

• Install lock carrier in normal position.

  See LOCK CARRIER, SERVICE POSITION .

• Install bumper.

  See FRONT BUMPER .