Technical data of On Board Diagnostic (OBD)
- DTC memory
- Permanent memory: contents remain intact when power supply is interrupted.
- Data output
- Rapid data transfer (operating mode 1)
- The ABS warning light -K47-, the brake system warning symbol and the traction control indicator light -K86- come on in the dashboard if a malfunction is detected and the affected system is switched off.
- Functions
- 01 - Check Control Module Versions. See CHECK CONTROL MODULE VERSIONS (FUNCTION 01) .
- 02 - Check DTC Memory. See ESP DIAGNOSTIC TROUBLE CODE (DTC) MEMORY, CHECKING .
- 03 - Output Diagnostic Test Mode. See OUTPUT DIAGNOSTIC TEST MODE (FUNCTION 03) .
- 04 - Basic setting. See ESP, CHECKING VIA ROAD TEST .
- 05 - Erase DTC memory. See ERASING DTC MEMORY .
- 06 - End Output. See ENDING OUTPUT .
- 07 - Code Control Module. See CODE CONTROL MODULE (FUNCTION 07) .
- 08 - Read Measuring Value Block. See READ MEASURING VALUE BLOCK (FUNCTION 08) .
- 11 - Login procedure. See PERFORMING LOGIN .
- Use VAS 5051 vehicle diagnostic, testing and information system or VAG 1551 scan tool to perform On Board Diagnostic (OBD).