Seat height adjustment unit, removing

Removing:

Remove seat → Seat, removing and installing .
Remove seat height adjustment handle → Seat height adjustment handle, removing .
Remove seat side trim → Seat side trim, removing .
Remove seat cushion → Removing and installing seat cushion .

Fig 1: Trim For Side Fittings Remove/Install Components

GW00016830

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Disengage nipple - 3 - at lever.
Disengage release cable - 5 - at adjuster wheel - 2 -.
Push through pins - 4 - (3x) from outside.
Take out seat height adjustment unit - 1 -.

Installing:

Fig 2: Trim For Side Fittings Remove/Install Components

GW00016830

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Attach nipple - 3 - to lever.
Wrap cable around guide roller.
Engage release cable - 5 - at adjuster wheel - 2 -.
Turn adjuster wheel - 2 - until cable makes contact with idler roller.

Attach height adjustment handle.
Actuate height adjustment handle. Gas-filled strut should release at approx. half-way point. If necessary, reset adjuster wheel - 2 -.