Tubular support, removing
- Remove seat → Seat, removing and installing .
- Remove seat side trim → Seat side trim, removing .
- Remove spring trim → Spring trim, removing .
- Remove trim for side fittings → Trim for side fittings, removing .
- Remove side trim → Side trim, removing .
- Remove seat belt buckle → Belt buckle anchorage point .
- Pull off trim - 1 - in direction of arrow.
- Remove nut - 3 -.
- Tightening torque 4 Nm
- Pull out screw - 2 -.
- Remove gas-filled strut - 1 - from holder.
- Remove screws - 2 - (4x).
- Tightening torque 28 Nm
- Remove screws - 3 - (2x).
- Tightening torque 25 Nm
- Take out rear adapter - 1 -.