LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2000 >> TT Base, 1.8 S >> Repair and Diagnosis >> Engine Performance >> Tune-Up >> 1.8L - Turbo Engine Mechanical, Engine Code(S): Amu, BEA >> 17 Engine - Lubrication >> Lubrication system components, removing and installing >> Lubrication system components, removing and installing

Lubrication system components, removing and installing

NOTE:
  • If large quantities of metal shavings or particles are found in the engine oil when repairing the engine, carefully clean the oil passages and replace the oil cooler and all the oil spray jets in order to prevent further damage occurring later.
  • The oil level must not be above the max. mark - danger of damage to catalytic converter.

Checking oil pressure and oil pressure switch. Refer to Oil pressure and oil pressure switch, checking 

Viscosity grades and oil specifications. Refer to Engine oil .

Checking engine oil level. Refer to Oil level, checking .

scientia non olet · About LEMON Manuals