Adapting Service Reminder Indicator (SRI), inspection service interval (time in days)
This function is used to adapt the number of days remaining until the next inspection service is due.
Indicated on display
- Press buttons -1- and -0- to select "Adaptation" function 10.
- Press -Q- button to confirm input.
Indicated on display
- Press buttons -0- and -7- to select channel number 07.
- Press -Q- button to confirm input.
Indicated on display
The display will show the number of days remaining before the next inspection service is due. In this example, "11" = 110 days.
NOTE:
- Values can only be entered in increments of 10 days. Therefore, the time is indicated in units of 10 days.
- Notes regarding replacement of the instrument cluster. See REPLACEMENT OF INSTRUMENT CLUSTER, INPUT VALUES .
- Only direct input of the values is possible using the VAG1551 scan tool.
- If an incorrect value is input "Adaptation" function 10 is ended and must be initiated again.
- Press --> button.
Indicated on display
- Input required value using keypad on VAG1551 scan tool, filling in initial spaces with "0."
Example:
Specification: 360 days
- Input "00036" using keypad.
Indicated on display
- Press -Q- button to confirm input.
Indicated on display
- Press -Q- button to confirm input.
Indicated on display
- Press -Q- button to confirm input.
Indicated on display
- Press --> button to complete adaptation.