Adapting Service Reminder Indicator (SRI), after replacing instrument cluster (distance remaining until next oil change service)
This function is used to adapt the distance remaining (in kilometers) before the next oil change service is due, after replacing the instrument cluster.
Indicated on display
Fig 1: VAG 1551 Scan Tool Display - Adapting SRI, After Replacing Instrument Cluster (Distance Remaining Until Next Oil Change Service) (1 Of 8)
- Press buttons -1- and -0- to select "Adaptation" function 10.
- Press -Q- button to confirm input.
Indicated on display
Fig 2: VAG 1551 Scan Tool Display - Adapting SRI, After Replacing Instrument Cluster (Distance Remaining Until Next Oil Change Service) (2 Of 8)
- Press buttons -1 - and -0- to select channel number 10.
- Press -Q- button to confirm input.
Indicated on display
Fig 3: VAG 1551 Scan Tool Display - Adapting SRI, After Replacing Instrument Cluster (Distance Remaining Until Next Oil Change Service) (3 Of 8)
The display will show the number of kilometers remaining before the next oil change service is due. In this example, "1" = 1000km.
NOTE:
- Values can only be entered in increments of 1000 km. Therefore, the distance is indicated in units of 1000 km.
- Even in countries where the speedometers are calibrated in miles, adaptation must be done in metric units. Convert the required distance interval from miles to kilometers to get the required adaptation value.
- Conversion of miles to kilometers: miles x 1.609 = km.
- Kilometers are displayed in "Read Measuring Value Block" function 08, display groups 002 and 050.
- The value entered is then counted backward to 0 km.
- Notes regarding replacement of the instrument cluster. See REPLACEMENT OF INSTRUMENT CLUSTER, INPUT VALUES .
- Only direct input of the values is possible using the VAG1551 scan tool.
- If an incorrect value is input "Adaptation" function 10 is ended and must be initiated again.
- Press --> button.
Indicated on display
Fig 4: VAG 1551 Scan Tool Display - Adapting SRI, After Replacing Instrument Cluster (Distance Remaining Until Next Oil Change Service) (4 Of 8)
- Input required value using keypad on VAG1551 scan tool, filling in initial spaces with "0."
Example:
Distance remaining: 1000 km
- Input "00001" using keypad.
Indicated on display
Fig 5: VAG 1551 Scan Tool Display - Adapting SRI, After Replacing Instrument Cluster (Distance Remaining Until Next Oil Change Service) (5 Of 8)
- Press -Q- button to confirm input.
Indicated on display
Fig 6: VAG 1551 Scan Tool Display - Adapting SRI, After Replacing Instrument Cluster (Distance Remaining Until Next Oil Change Service) (6 Of 8)
- Press -Q- button to confirm input.
Indicated on display
Fig 7: VAG 1551 Scan Tool Display - Adapting SRI, After Replacing Instrument Cluster (Distance Remaining Until Next Oil Change Service) (7 Of 8)
- Press -Q- button to confirm input.
Indicated on display
Fig 8: VAG 1551 Scan Tool Display - Adapting SRI, After Replacing Instrument Cluster (Distance Remaining Until Next Oil Change Service) (8 Of 8)
- Press --> button to complete adaptation.