Time since service
This function is used to input the time in days since the last service.
Indicated on display
Fig 1: VAG 1551 Scan Tool Display - Time Since Service, Instrument Cluster With Maintenance Interval Extension (1 Of 9)
- Press -1- and -0- and confirm by pressing the -Q- button.
Indicated on display
Fig 2: VAG 1551 Scan Tool Display - Time Since Service, Instrument Cluster With Maintenance Interval Extension (2 Of 9)
- Press -Q- button to confirm input.
Indicated on display
Fig 3: VAG 1551 Scan Tool Display - Time Since Service, Instrument Cluster With Maintenance Interval Extension (3 Of 9)
- Press buttons -4- and 1-.
- Press -Q- button to confirm input.
- Indicated on display: Time in days since last service is displayed (here for example 110 represents 110 days)
NOTE:
- Input of the current specified value is only possible in units of one day, indication in display also changes by units of one day.
- Observe notes when replacing instrument cluster. See REPLACEMENT OF INSTRUMENT CLUSTER, INPUT VALUES .
- Values can only be input directly using the scan tool keypad.
- If an incorrect value is input, the "Adaptation" function is terminated and must be re-initiated.
- Press --> button.
- Indicated on display
- Input desired value using scan tool keypad, filling initial positions with "0".
Example:
Desired input value: for example 200 days
Keypad input: 00200
- Indicated on display
- Press -Q- button to confirm input.
- Indicated on display
- Press -Q- button to confirm input.
- Indicated on display
- Press -Q- button to confirm input.
- Indicated on display
- End adaptation of time since service by pressing the --> button.