Adaptation of service indicator for Inspection Service II (time)

With this function the interval value (time in days) can be entered for the next Inspection Service II.

• Press buttons 0 and 8.
• Press Q button to confirm input.

  Indicated on display.

  Fig 1: Scan Tool Display - Adaptation Of Service Indicator For Inspection Service II, Time (1 Of 7)

  Courtesy of AUDI OF AMERICA, INC.

  The interval value for the next Inspection Service II is displayed in days. In this example 47 corresponds with 470 days.

  NOTE:

  • The entry of the applicable value is only possible in increments of 10 days, therefore, the display shows multiples of 10 days.
  • When replacing the instrument cluster. see INSTRUMENT CLUSTER, VALUES TO BE ENTERED WHEN REPLACING .
  • With the VAG 1551 Scan Tool (ST), only direct entry is possible.
  • If a mistake was made during the entry, function "Adaptation" is ended and has to be started again.
• Press button.

  Indicated on display.

  Fig 2: Scan Tool Display - Adaptation Of Service Indicator For Inspection Service II, Time (2 Of 7)

  Courtesy of AUDI OF AMERICA, INC.
• Enter interval value with VAG 1551. Enter first digits with "0."

  Example:

  Specified value: 730 days

  Enter value: 00073

  Indicated on display.

  Fig 3: Scan Tool Display - Adaptation Of Service Indicator For Inspection Service II, Time (3 Of 7)

  Courtesy of AUDI OF AMERICA, INC.
• Press Q button to confirm input.

  Indicated on display.

  Fig 4: Scan Tool Display - Adaptation Of Service Indicator For Inspection Service II, Time (4 Of 7)

  Courtesy of AUDI OF AMERICA, INC.
• Press Q button to confirm input.

  Indicated on display.

  Fig 5: Scan Tool Display - Adaptation Of Service Indicator For Inspection Service II, Time (5 Of 7)

  Courtesy of AUDI OF AMERICA, INC.
• Press Q button to confirm input.

  Indicated on display.

  Fig 6: Scan Tool Display - Adaptation Of Service Indicator For Inspection Service II, Time (6 Of 7)

  Courtesy of AUDI OF AMERICA, INC.
• End adaptation by pressing the button.

  Indicated on display.

  Fig 7: Scan Tool Display - Adaptation Of Service Indicator For Inspection Service II, Time (7 Of 7)

  Courtesy of AUDI OF AMERICA, INC.