Adaptation of service indicator for Inspection Service I (time)
With this function the interval value (time in days) can be entered for the next Inspection Service I.
- Press buttons 0 and 7.
- Press Q button to confirm input.
Indicated on display.
Courtesy of AUDI OF AMERICA, INC.
The interval value for the next Inspection Service I is displayed in days. In this example 11 corresponds with 110 days.
NOTE:- The entry of the applicable value is only possible in increments of 10 days, therefore, the display shows multiples of 10 days.
- When replacing the instrument cluster. see INSTRUMENT CLUSTER, VALUES TO BE ENTERED WHEN REPLACING .
- With the VAG 1551 Scan Tool (ST), only direct entry is possible.
- If a mistake was made during the entry, function "Adaptation" is ended and has to be started again.
- Press button.
Indicated on display.
- Enter interval value with VAG 1551. Enter first digits with "0."
Example:
Specified value: 360 days
Enter value: 00036
Indicated on display.
- Press Q button to confirm input.
Indicated on display.
- Press Q button to confirm input.
Indicated on display.
- Press Q button to confirm input.
Indicated on display.
- End adaptation by pressing the button.
Indicated on display.