Notes on exchanging instrument cluster

WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2005 Audi allroad, 2004 Audi allroad, 2004 Audi A6, 2003 Audi allroad, and 2003 Audi S6. However, it is still accessible from the selected car via links, so may be relevant.

Do not disassemble instrument cluster.
When the replacement of a malfunctioning instrument cluster is necessary, follow exchange part procedures.
Complete report form and return together with inst. cluster.
Use the original packaging from the new cluster when returning modules.
The instrument cluster must be coded according to market and equipment versions
See CODE CONTROL MODULE (FUNCTION 07) .
The odometer reading must be adapted to the new/exchange instrument cluster using the VAS 5051 tester
See VAS 5051 TESTER, CONNECTING .
Anti-theft immobilizer functions supported by the instrument cluster must be adapted to the Engine Control Module (ECM) using the VAS 5051 tester
See ADAPTATION AFTER REPLACING INSTRUMENT CLUSTER .