Consumption signal, checking (engine at powertrain CAN-bus): Notes
WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2005 Audi allroad, 2004 Audi allroad, 2004 Audi A6, 2003 Audi allroad, and 2003 Audi S6. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
- On some engines, the consumption signal is transferred from the Engine Control Module (ECM) to the instrument cluster via the powertrain CAN-bus.
- Malfunctions in the communication between Engine Control Module (ECM) and instrument cluster can only be detected via On Board Diagnostic (OBD) (DTC 01312 and 01314).