On Board Diagnostic (OBD) functions

The following functions are possible:

1. 01 - Check Control Module Versions. See CONTROL MODULE VERSIONS, CHECKING (FUNCTION 01)  .
2. 02 - Check DTC Memory. See DIAGNOSTIC TROUBLE CODE (DTC) MEMORY, CHECKING (FUNCTION 02)  .
3. 03 - Output Diagnostic Test Mode. See OUTPUT DIAGNOSTIC TEST MODE (DTM) (FUNCTION 03)  .
4. 05 - Erase DTC Memory. See DIAGNOSTIC TROUBLE CODE (DTC) MEMORY, ERASING (FUNCTION 05)  .
5. 06 - End Output. See END OUTPUT (FUNCTION 06)  .
6. 07 - Code Control Module. See CODE CONTROL MODULE (FUNCTION 07)  .
7. 08 - Read Measuring Value Block. See READ MEASURING VALUE BLOCK (FUNCTION 08)  .