Instrument cluster, removing and installing: Installing

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2003 Audi S8, 2003 Audi A8, 2002 Audi S8, 2002 Audi A8, and 2001 Audi S8. However, it is still accessible from the selected car via links, so may be relevant.

Connect electrical connectors and secure wiring harness on back of instrument cluster using cable ties.
Install instrument cluster in reverse order of removal.
After installing, check operation.

If OK:

Transfer and initiate all applicable input values. See INPUT VALUES FOR REPLACING INSTRUMENT CLUSTER .