Description And Operation

WARNING: This page is about a different variant/trim than selected.

NOTE:

This engine uses a fixed ignition timing system. Basic ignition timing is not adjustable. All spark advance is determined by the Powertrain Control Module (PCM).

The ignition system is referred to as coil on plug. The system's main components are:

Ignition Coils. Refer to ELECTRICAL/8I - IGNITION CONTROL/COIL, IGNITION/DESCRIPTION AND OPERATION) .
Ignition Capacitor. Refer to CAPACITOR, IGNITION, DESCRIPTION AND OPERATION .
Spark Plugs. Refer to SPARK PLUG, DESCRIPTION AND OPERATION .
Camshaft Position Sensor. Refer to ELECTRICAL/IGNITION CONTROL/SENSOR, CAMSHAFT POSITION/DESCRIPTION AND OPERATION .
Crankshaft Position Sensor. Refer to SENSOR, CRANKSHAFT POSITION, REMOVAL AND INSTALLATION .
Knock Sensor. Refer to ELECTRICAL/IGNITION CONTROL/SENSOR, KNOCK/DESCRIPTION AND OPERATION .
Powertrain Control Module. Refer to MODULE, POWERTRAIN CONTROL (PCM), DESCRIPTION AND OPERATION .

Please refer to the appropriate component links for further information.