DTC U1281 (Gauge Control Module) (2014 2015 2016)
DTC U1281 : Gauge control module lost communication with MICU (MICU frame)
| DTC Description | DTC |
|---|---|
| U1281 Gauge control module lost communication with MICU (MICU frame) |
DTC (Gauge Control Module)
NOTE:
If you are troubleshooting multiple DTCs, be sure to follow the instructions in B-CAN System Diagnosis Test Mode A - Refer to: Body Electrical Troubleshooting - B-CAN System Diagnosis Test Mode A - Initial Communication and DTC Checks (2014 2015 2016)
- Problem verification
- 1. Clear the DTCs with the HDS.
- 2. Turn the vehicle to the OFF (LOCK) mode and then the ON mode.
- 3. Wait for at least 6 seconds.
- 4. Check for DTCs with the HDS.
DTC Description DTC U1281 Gauge control module lost communication with MICU (MICU frame) Is DTC U1281 indicated?
YES
Go to MICU DTC U1280 troubleshooting - Refer to: DTC Troubleshooting: U1280 (2014 2015 2016) .
NO
Intermittent failure, the system is OK at this time.