DTC U1280

DTC U1280  : Communication bus line error (BUS-OFF)

DTC (Gauge Control Module)

NOTE: 

• If you have any loss of communication DTCs for the PCM, troubleshoot those DTCs first.
• If you are troubleshooting multiple DTCs, be sure to follow the instructions in B-CAN System Diagnosis Test Mode A - Refer to: Body Electrical Troubleshooting - B-CAN System Diagnosis Test Mode A - Initial Communication and DTC Checks (2014 2015 2016) or Body Electrical Troubleshooting - B-CAN System Diagnosis Test Mode A - Initial Communication and DTC Checks (2017 2018 2019 2020)

1. Problem verification

   - 1. Clear the DTCs with the HDS.

   - 2. Turn the vehicle to the OFF (LOCK) mode and then the ON mode.

   - 3. Wait for at least 6 seconds.

   - 4. Check for DTCs with the HDS.

   DTC Description	DTC
   U1280 Communication bus line error (BUS-OFF)

   Is DTC U1280 indicated?

   YES 

   Go to MICU DTC U1280 troubleshooting - Refer to: DTC U1280 (2014 2015 2016), or DTC U1280 (2017 2018 2019 2020) .

   NO 

   Intermittent failure, the system is OK at this time.