LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 2014 >> TSX Special Edition, Automatic Trans >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Climate Control (4-CYL) >> In-Car Temperature Sensor Replacement

In-Car Temperature Sensor Replacement

  1. Remove the center console panel (see CENTER CONSOLE PANEL REMOVAL/INSTALLATION ).
  2. Remove the driver's center trim (see DRIVER'S OUTER DASHBOARD TRIM REMOVAL/INSTALLATION ).
  3. Pull out the in-car temperature sensor (A), disconnect the connector (B), and remove the in-car temperature sensor from the air hose (C).
    Fig 1: Identifying In-Car Temperature Sensor, Connector And In-Car Temperature Sensor
    G07770755Courtesy of AMERICAN HONDA MOTOR CO., INC.
  4. Install the sensor in the reverse order of removal. Be sure to connect the air hose securely.
scientia non olet · About LEMON Manuals