LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 2014 >> TSX Special Edition, Automatic Trans >> Repair and Diagnosis >> Electrical >> Gauges >> Dashboard (4-CYL) >> Glove Box Damper Replacement

Glove Box Damper Replacement

NOTE: Take care not to scratch the glove box.
  1. Remove the glove box (see GLOVE BOX SEPARATOR REMOVAL/INSTALLATION )
  2. Release the glove box damper wire (A). Remove the screws, then remove the glove box damper (B).
    Fig 1: Identifying Glove Box Damper Wire And Glove Box Damper With Screws
    G07769917Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Install the damper in the reverse order of removal.
scientia non olet · About LEMON Manuals