LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 2014 >> TSX Special Edition, Automatic Trans >> Repair and Diagnosis >> Electrical >> Gauges >> Dashboard (4-CYL) >> Glove Box Separator Removal/Installation

Glove Box Separator Removal/Installation

NOTE: Take care not to scratch the dashboard or the related parts.
  1. Open the glove box.
  2. Pull the glove box separator (A) back to release the hooks (B) and the pins (C), then remove it.
    Fig 1: Identifying Glove Box Separator, Hooks And Pins
    G07769913Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Install the separator in the reverse order of removal, and push the hooks and the pins into place securely.
scientia non olet · About LEMON Manuals