LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 2014 >> TSX Special Edition, Automatic Trans >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Trunk Lid (4-CYL) >> Trunk Lid Weatherstrip Replacement

Trunk Lid Weatherstrip Replacement

  1. Remove the trunk lid weatherstrip (A) by pulling it off.
    Fig 1: Identifying Trunk Lid Weatherstrip And Alignment Mark
    G07770142Courtesy of AMERICAN HONDA MOTOR CO., INC.
  2. Locate the painted alignment mark (B or C) on the trunk lid weatherstrip. Align the painted mark in the center of the trunk lid opening, and install the weatherstrip all the way around in the direction shown. Make sure there are no wrinkles in the weatherstrip.
  3. Check for water leaks (see step 9 on DOOR POSITION ADJUSTMENT ).
scientia non olet · About LEMON Manuals