LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 2014 >> TSX Special Edition, Automatic Trans >> Repair and Diagnosis >> Accessories & Equipment >> Interior/Illumination Lights >> Interior Lights (4-CYL) >> Ambient Light Test/Replacement

Ambient Light Test/Replacement

NOTE: The ambient light is built into the moonroof switch.
  1. Remove the front individual map lights (see FRONT INDIVIDUAL MAP LIGHT TEST/REPLACEMENT ).
  2. Disconnect the moonroof switch 12P connector (A) and the map light 3P connector (B).
    Fig 1: Identifying Moonroof Switch 12P Connector (A), Map Light 3P Connector (B) And Moonroof Switch (C)
    G07770548Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Remove the moonroof switch (C) from the map light housing.
  4. At the moonroof switch side, check the light by connecting battery power to terminal No. 3 and ground to terminal No. 1. The ambient light should come on. If the light does not come on, replace the moonroof switch assembly.
  5. Install the parts in the reverse order of removal.
scientia non olet · About LEMON Manuals