Emblem/Sticker Replacement - Sedan

NOTE: When removing the emblems, take care not to scratch the body.

To remove the front "A" emblem, remove the front bumper (see FRONT BUMPER REMOVAL/INSTALLATION - SEDAN ).
Clean the body surface with a shop towel dampened with isopropyl alcohol. After cleaning, keep oil, grease, and water from getting on the surface.
Apply the emblems where shown.

Front

Fig 1: Identifying Emblem/Sticker Replacement Position (Front)

Courtesy of AMERICAN HONDA MOTOR CO., INC.

Rear

Fig 2: Identifying Emblem/Sticker Replacement Position (Rear)

Courtesy of AMERICAN HONDA MOTOR CO., INC.