LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 2014 >> TSX Special Edition, Automatic Trans >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Dashboard (4-CYL) >> Side Pocket Removal/Installation

Side Pocket Removal/Installation

NOTE:
  • Take care not to scratch the dashboard or the related parts.
  • The driver's side pocket is shown; the passenger's side pocket is similar.
  1. Remove the center console (see CENTER CONSOLE PANEL REMOVAL/INSTALLATION ).
  2. Remove the screws, and pull out the side pocket (A) to detach the clip, then remove it.
    Fig 1: Identifying Side Pocket With Clip And Screws
    G07769907Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Install the side pocket in the reverse order of removal, and note these items:
    • If the clips are damaged or stress-whitened, replace them with new ones.
    • Push the clips into place securely.