LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 2014 >> TSX Special Edition, Automatic Trans >> Repair and Diagnosis >> Accessories & Equipment >> Exterior Lights >> Exterior Lights (4-CYL) >> Fog Light Replacement

Fog Light Replacement

  1. Remove the front bumper (see FRONT BUMPER REMOVAL/INSTALLATION - SEDAN ), and disconnect the connectors from the fog lights.
  2. Remove the two screws, then remove the fog light (A) from the front bumper.
    Fig 1: Identifying Fog Light (A)
    G07770512Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Install the fog light in the reverse order of removal.
  4. After replacement, adjust the fog lights (see FOG LIGHT ADJUSTMENT ).