Headlight (Low Beam) (Without HID)
- Remove the inner fender (see FRONT INNER FENDER REPLACEMENT ).
- Turn the cover (A) 45° counterclockwise to remove it from the headlight assembly.
- Disconnect the 1P connector (A) from the headlight bulb (B).
Headlight Bulb (Low Beam): 55 W
- Pull the retaining spring (C) away from the bulb then remove the bulb.
- Install a new bulb in the reverse order of removal. Make sure the notches in the bulb align with the tabs in the headlight.NOTE: Do not touch the glass of the bulb with your hands. If necessary, clean the glass area with alcohol.