The MID beeper does not sound when the BSI ON/OFF button is pushed
NOTE:
- If the system malfunctions, always check for DTCs with the HDS.
- If a DTC is stored, troubleshoot the DTC first.
- Check for DTCs with the HDS (see HOW TO RETRIEVE DTCS
).
Are any DTCs indicated?
YES -Troubleshoot the indicated DTC(s).
NO -Go to step 2.
- Do the gauge control module self-diagnostic function (see
SELF-DIAGNOSTIC FUNCTION
).
Does the side beeper sound?
YES -Replace the BSI control unit (see BSI CONTROL UNIT REMOVAL/INSTALLATION ).
NO -Replace the gauge control module (see GAUGE CONTROL MODULE REPLACEMENT ), and recheck.