LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 2012 >> ZDX >> Repair and Diagnosis >> Electrical >> Gauges >> Blind Spot Information System (BSI) >> BSI Control Unit Removal/Installation

BSI Control Unit Removal/Installation

  1. Remove the driver's side kick panel (see TRIM REMOVAL/INSTALLATION - DOOR AREAS ).
  2. Remove the screws from the kick panel (A), then remove the BSI control unit (B).
    Fig 1: Identifying Kick Panel, BSI Control Unit And Screws
    G08078343Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Install the BSI control unit in the reverse order of removal.
scientia non olet · About LEMON Manuals