LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 2009 >> TSX Standard >> Repair and Diagnosis >> Body & Frame >> Seats >> Seat System (4-CYL) >> Rear Seat Cushion Cover Replacement

Rear Seat Cushion Cover Replacement

NOTE:
  • Put on gloves to protect your hands
  • Take care not to tear the seams or damage the seat covers
  1. Remove the seat cushion (see SEAT CUSHION )
  2. From under the seat cushion, release all the upholstery rings (A), and fold back the seat cushion cover (B)
    Fig 1: Identifying Upholstery Rings And Seat Cushion Cover
    G05994479Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Pull back the edge of the seat cushion cover (A) all the way around, and release the upholstery rings (B), then remove the seat cushion cover
    Fig 2: Identifying Seat Cushion Cover And Upholstery Rings
    G05994480Courtesy of AMERICAN HONDA MOTOR CO., INC.
  4. Install the cover in the reverse order of removal, and note these items
    • To prevent wrinkles when installing a seat cushion cover, make sure the material is stretched evenly over the pad before securing the upholstery rings.
    • Replace any upholstery rings (A) you removed with new ones Install them with commercially available upholstery ring pliers (B)
      Fig 3: Installing Rear Seat Cushion Cover
      G05994481Courtesy of AMERICAN HONDA MOTOR CO., INC.
scientia non olet · About LEMON Manuals