LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 2009 >> TSX Standard >> Repair and Diagnosis >> Electrical >> Gauges >> Consoles (4-CYL) >> Center Console Removal/Installation

Center Console Removal/Installation

NOTE:
  • Put on gloves to protect your hands
  • Take care not to scratch the front seat, dashboard, and related parts
  1. Remove these items
  2. Disconnect the rear accessory power socket connector (A), the auxiliary jack assembly connector (B), and if equipped, the USB jack connector (C)
    3. Fig 1: Identifying Rear Accessory Power Socket, Auxiliary Jack Assembly And USB Jack Connector
    G05994291Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Remove the screws (A) and the bolts (B) securing the center console (C)
    Fig 2: Screws And Bolts Securing Center Console With Torque Specifications
    G05994292Courtesy of AMERICAN HONDA MOTOR CO., INC.
  4. Remove the center console (A)
    1. Detach the clips (B, C, D) by pulling the front edges of the center console out from both sides
    2. Pull up the console to release the hooks (E)
      3. Fig 3: Identifying Center Console
      G05994293Courtesy of AMERICAN HONDA MOTOR CO., INC.
  5. Install the console in the reverse order of removal, and note these items
scientia non olet · About LEMON Manuals