Center Console Rear Trim Removal/Installation

Special Tools Required

KTC trim tool set SOJATP2014 *

* Available through the Acura Tool and Equipment Program, call 888-424-6857

NOTE:

Take care not to scratch the center console and the related parts
Use the appropriate tool from the KTC trim tool set to avoid damage when removing components

Gently pull out the console rear trim (A) to detach the clips and to release both upper tabs (B) on the center console, then remove the trim

Fig 1: Identifying Console Rear Trim And Tabs On Center Console

G05994294

Courtesy of AMERICAN HONDA MOTOR CO., INC.

Install the trim in the reverse order of removal, and note these items

If the clips are damaged or stress-whitened, replace them with new ones
Push the clips into place securely