Seat Cushion

NOTE: Take care not to scratch the body or tear the seat covers

Fold both rear seat-backs forward
Pull back the front portion of the spare tire lid, and detach the clips (see step 2 on TRIM REMOVAL/INSTALLATION - TRUNK AREA )
Remove the bolt securing the seat cushion (A) from behind the left rear seat-back (B)

Fig 1: Seat Cushion And Left Rear Seat-Back With Torque Specifications
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Raise both rear seat-backs
While pushing down on the seat cushion (A), pull the seat hook handles (B) to release the hooks (C)

Fig 2: Identifying Seat Hook Handles And Releasing Hooks
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Pull back the seat cushion to pull out the seat belt buckles (D) from the holes in the seat cushion, and to release the center seat belt (E) and the center seat belt buckle (F) from their slits (G), and remove it
Install the seat cushion (A) in the reverse order of removal When installing the seat cushion, first install the seat belt buckles (B) into the holes (C) from under the seat cushion, then slip the center seat belt buckle (D) and the center seat belt (E) through the slits (F) in the seat cushion

Fig 3: Identifying Seat Cushion, Seat Belt Buckles, Center Seat Belt Buckle And Center Seat Belt
Courtesy of AMERICAN HONDA MOTOR CO., INC.