Glass Replacement

Close the glass fully.
Slide the sunshade all the way back.
Pry out the lid (A), remove the screws (B), and release the hooks (C), then remove both bracket covers (D). With a TORX T25 bit, remove the bolts (E) from both glass brackets (F).

Fig 1: Bracket Covers W/Torque Specification
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Remove the glass (A) by lifting it up. Do not damage the roof panel.

Fig 2: Removing Glass By Lifting Glass
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Install the glass in the reverse order of removal, and adjust the glass position alignment (see GLASS POSITION ADJUSTMENT ).
Check for water leaks. Use free-flowing water from a hose without a nozzle. Do not use high-pressure water.
NOTE: It is normal for some water to seep past the moonroof into the moonroof frame and exit through the drains.